Setup
Connections
ESCON Module 50/5 Hardware Reference
CCMC | 2021-08 | rel9051
3-17
3.3.2 Hall Sensor
Figure 3-5 Hall Sensor 1 Input Circuit (analogously valid also for Hall Sensors 2 & 3)
Hall sensor supply voltage +5 VDC
Max. Hall sensor supply current 30 mA
Input voltage 0…24 VDC
Max. input voltage +24 VDC
Logic 0 typically <1.0 V
Logic 1 typically >2.4 V
Internal pull-up resistor 10 kΩ (referenced to +5.45 V)
To Next Page
Loading...