Maxon ESCON 50/5 - 5.7.2.6 MoBo Analog I;Os (J6)

Motherboard Design Guide
ESCON Module Motherboard (438779)
ESCON Module 50/5 Hardware Reference
CCMC | 2021-08 | rel9051
5-45
5.7.2.6 Analog I/Os (J6)
Figure 5-35 ESCON Module MoBo – Analog I/Os Plug J6
Table 5-27 ESCON Module MoBo – Analog I/Os Plug J6 – Pin Assignment
Table 5-28 ESCON Module MoBo – Analog I/Os Plug J6 – Specification & Accessories
J6
Signal Description
Pin
1 AnIN1+ Analog input 1, positive signal
2 AnIN1− Analog input 1, negative signal
3 AnIN2+ Analog input 2, positive signal
4 AnIN2− Analog input 2, negative signal
5 AnOUT1 Analog output 1
6 AnOUT2 Analog output 2
7 GND Ground
Specification / Accessories
Type Pluggable screw-type terminal block, 7 poles, 3.5 mm pitch
Suitable cables
0.14…1.5 mm
2
multi-core, AWG 28-14
0.14…1.5 mm
2
single wire, AWG 28-14