Maxon ESCON 50/5 - 5.7.2.4 MoBo Encoder Connector (J4)

To Next Page

To Previous Page

Motherboard Design Guide

ESCON Module Motherboard (438779)

ESCON Module 50/5 Hardware Reference

5-42 CCMC | 2021-08 | rel9051

5.7.2.4 Encoder (J4)

Figure 5-33 ESCON Module MoBo – Encoder Socket J4

Table 5-22 ESCON Module MoBo – Encoder Socket J4 – Pin Assignment

Table 5-23 ESCON Module MoBo – Encoder Socket J4 – Accessories

Signal Description

1 not connected –

2 +5 VDC Encoder supply voltage (+5 VDC; ≤70 mA)

3 GND Ground

4 not connected –

5 Channel A\ Channel A complement

6 Channel A Channel A

7 Channel B\ Channel B complement

8 Channel B Channel B

9 not connected –

10 not connected –

Accessories

Suitable strain

relief

Retainer

For sockets with strain relief:

1 retainer clip, height 13.5 mm, 3M (3505-8110)

For sockets without strain relief:

1 retainer clip, height 7.9 mm, 3M (3505-8010)

Latch For sockets with strain relief: 2 pieces, 3M (3505-33B)