Maxon ESCON 50/5 - 5.7.1 MoBo Assembly

To Next Page

To Previous Page

Motherboard Design Guide

ESCON Module Motherboard (438779)

ESCON Module 50/5 Hardware Reference

5-38 CCMC | 2021-08 | rel9051

5.7.1 Assembly

The ESCON Module MoBo is designed to easily be screw-mounted or integrated into standard rail systems.

For ordering information for the components required Figure 5-29 (only for illustrative purposes) and

Table 5-14.

Figure 5-29 ESCON Module MoBo – Mounting on DIN Rail

Table 5-14 ESCON Module MoBo, mounting on DIN Rail – Specification & Accessories

Specification / Accessories

Adapter for DIN rail

PHOENIX CONTACT

2 x panel mounting base element 11.25 mm UMK-SE11.25-1 (2970442)

2 x base element 45 mm UMK-BE45 (2970015)

2 x foot element UMK-FE (2970031)

CamdenBoss

2 x end section with foot 22.5 mm (CIME/M/SEF2250S)

1 x base element 22.5 mm (CIME/M/BE2250SS)

1 x base element 45 mm (CIME/M/BE4500SS)