Maxon ESCON 50/5 - 5.7.2.5 MoBo Digital I;Os (J5)

To Next Page

To Previous Page

Motherboard Design Guide

ESCON Module Motherboard (438779)

ESCON Module 50/5 Hardware Reference

5-44 CCMC | 2021-08 | rel9051

5.7.2.5 Digital I/Os (J5)

Figure 5-34 ESCON Module MoBo – Digital I/Os Plug J5

Table 5-25 ESCON Module MoBo – Digital I/Os Plug J5 – Pin Assignment

Table 5-26 ESCON Module MoBo – Digital I/Os Plug J5 – Specification & Accessories

Signal Description

1 DigIN1 Digital input 1

2 DigIN2 Digital input 2

3 DigIN/DigOUT3 Digital input/output 3

4 DigIN/DigOUT4 Digital input/output 4

5 GND Ground

6 +5 VDC Auxiliary output voltage (+5 VDC; ≤10 mA)

Specification / Accessories

Type Pluggable screw-type terminal block, 6 poles, 3.5 mm pitch

Suitable cables

0.14…1.5 mm

multi-core, AWG 28-14

0.14…1.5 mm

single wire, AWG 28-14