Setup
Connections
ESCON Module 50/5 Hardware Reference
CCMC | 2021-08 | rel9051
3-23
3.3.5 Analog I/Os
3.3.5.1 Analog Inputs 1 and 2
Figure 3-13 AnIN1 Circuit (analogously valid also for AnIN2)
3.3.5.2 Analog Outputs 1 and 2
Figure 3-14 AnOUT1 Circuit (analogously valid also for AnOUT2)
Input voltage −10…+10 VDC (differential)
Max. input voltage +24 VDC/−24 VDC
Common mode voltage −5…+10 VDC (referenced to GND)
Input resistance
80 kΩ (differential)
65 kΩ (referenced to GND)
A/D converter 12-bit
Resolution 5.64 mV
Bandwidth 10 kHz
Output voltage −4…+4 VDC
D/A converter 12-bit
Resolution 2.42 mV
Refresh rate
AnOUT1: 26.8 kHz
AnOUT2: 5.4 kHz
Analog bandwidth of output amplifier 50 kHz
Max. capacitive load
300 nF
Note: The rate of the increase is limited in
proportion to the capacitive load (e.g. 5 V/ms @300
nF).
Max. output current limit 1 mA
To Next Page
Loading...