MAYBACH 62 - Page 337

335
Controls in detail
Pocket PC remote control*
Choosing automatic mode
 Press symbol 4.
Depending on the ambient bright-
ness, the display assumes either the
daytime or the nighttime setting.
Choosing manual mode
 Press symbol 3.
Regardless of the ambient brightness,
the selected daytime or nighttime
setting is constant.
Choosing daytime or nighttime setting
 Press symbol 6.
The display assumes the daytime set-
ting.
or
 Press symbol 5.
The display assumes the nighttime
setting.
Selecting submenu: Display brightness
and selecting settings
1 Submenu: Display Brightness
2 Settings menu
3 Manual mode
4 Automatic mode
5 To make display darker
6 To make display brighter
 Press submenu button: Display
Brightness 1.
The selected symbol in button 1 is
highlighted in the display and you
will see the corresponding settings
menu 2.
Choosing automatic mode
 Press symbol 4.
Depending on the ambient bright-
ness, the display becomes either
brighter or darker.
Choosing manual mode
 Press symbol 3.
Regardless of the ambient brightness,
the selected display brightness re-
mains constant.
Adjusting display brightness
 Press button 5 or 6 repeatedly until
the desired display brightness has
been reached.