Theft-Deterrent System
If the theft-deterrent system detects an
inappropriate entry into the vehicle,
which could result in the vehicle or its
contents being stolen, the alarm alerts
the surrounding area of an abnormality
by sounding the horn and flashing the
hazard warning lights.
The system will not function unless it's
properly armed. So when you leave the
vehicle, follow the arming procedure
correctly.
How to Use the
Theft-Deterrent System
How to Arm the System
1. Close the windows and the
convertible top securely.
2. Switch the vehicle power OFF.
3. Make sure the hood, the doors,
and the trunk lid are closed.
4. Press the lock button on the
transmitter. The hazard warning
lights will
flash
once.
The following method will also arm
the theft-deterrent system:
Press the door-lock switch
while
any door is open and then close
both doors.
Press a request switch.
The security indicator light
in
the instrument cluster flashes twice
per second for 20 seconds.
5. After 20 seconds, the system is fully
armed.
NOTE
The theft-deterrent system can also
be armed by activating the auto
relock function with both the doors,
the trunk lid and the hood closed.
Refer to How to Use the Key on page
4-5.
The system will disarm if one of the
following operations takes place
within 20 seconds after pressing the
lock button:
Unlocking any door.
Opening any door.
Opening the hood.
Switching the vehicle power ON.
To rearm the system, do the arming
procedure again.
Opening/closing
Security System
4-41
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
