How to Use the Dynamic Stability Control (DSC)
Enabling Operation of the DSC
Drive the vehicle at a speed of about 20 km/h (13 mph) or faster.
The DSC is operable.
When the DSC operates, the TCS/DSC operation indicator light
flashes.
Stopping Operation of the Traction Control System (TCS)/DSC/Kinematic Posture
Control (KPC)
1. Switch the vehicle power ON.
2. Continue pressing the DSC OFF switch while the vehicle is stopped until a sound
is activated.
Press the DSC OFF switch again to enable the TCS/DSC/KPC operation.
TCS/DSC/KPC Operation Condition
Switch operation Indicator light
TCS operation
condition
DSC operation
condition
KPC operation
condition
Press the DSC OFF
switch continuously
until a sound is ac-
tivated.
DSC OFF indicator
light
is on
Operates at a vehi-
cle speed of 6
km/h (3 mph) or
slower
Non-operation Non-operation
Press the
DSC-TRACK switch
continuously until a
sound is activated.
DSC OFF indicator
light
is on
DSC-TRACK indi-
cator light
is on
Operation frequen-
cy is suppressed
Operation frequen-
cy is suppressed
Operation
NOTE
If the engine is stopped while the TCS/DSC/KPC operation is canceled, the
TCS/DSC/KPC becomes operational when the engine is started the next time.
Driving
Dynamic Stability Control (DSC)
5-66
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
