How to Use the Blind
Spot Monitoring (BSM)
When the BSM operates
The BSM operates when the vehicle
speed is about 10 km/h (6.2 mph) or
faster and the system detects an
approaching vehicle.
When the BSM operates, the driver is
notified of the presence of an
approaching vehicle using the BSM
warning lights and a screen display
(white)
*1
.
BSM warning light
Instrument cluster
*
1 The instrument cluster screen display (white)
is displayed only when the instrument
cluster is set to the i-ACTIVSENSE display.
When the turn signal lever is operated
in the direction in which an
approaching vehicle is detected, the
driver is notified of the danger by
flashing of the BSM warning lights, the
warning sound, and the warning
indication (amber).
BSM warning light
Instrument cluster
NOTE
The BSM may not operate normally if
any of the following conditions is
met.
The rear side radar sensors cannot
detect an object.
Refer to Radar Sensors on page
5-94.
The road is on a steep slope.
The road is extremely wide.
Driving
Blind Spot Monitoring (BSM)
5-107
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
