Jack
*
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
counterclockwise.
1. Wing bolt
2. Jack screw
To secure the jack
1. Insert the wing bolt into the jack
with the jack screw pointing back
and turn the wing bolt clockwise to
temporarily tighten it.
2. Turn the jack screw clockwise.
1. Wing bolt
2. Jack screw
3. Turn the wing bolt completely to
secure the jack.
4. Insert the cover tabs and install the
cover.
Maintenance
Always keep the jack clean.
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately lubricated.
Other Equipment
Tool Storage
*Some models.
7-49
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
