Child-Restraint System Suitability for Various Seat
Positions Table
(Mexico)
Provided information in the table shows your child-restraint system suitability for
various seating position. For installation suitability of other manufacturer
child-restraint system, carefully consult the manufacturer's instructions which
accompany the child-restraint system.
When installing a child-restraint system, the following points must be observed:
When installing a child-restraint system to the passenger seat, adjust the seat slide
position as far back as possible.
Refer to How to Use the Seats on page 3-27.
When it is difficult to install a child-restraint system to the passenger seat, or the
seat belt cannot be secured to the child-restraint system, perform the following
operations to adjust the seat holding the child-restraint system so that the seat belt
can be secured completely to it.
Move the seat forward or back.
Move the seatback forward or back.
An i-Size child-restraint system refers to a child-restraint system which has
acquired i-Size category
certification
for the
UN-R
129 regulation.
When installing a child-restraint system to the passenger seat, refer to the
child-restraint system manufacturer's instructions.
Seating position
Passenger
Airbag activated Airbag de-activated
Seating position suitable for uni-
versal belted (Yes/No)
Yes (UF) Yes (U)
i-Size seating position (Yes/No) No No
Largest suitable rearward facing
fixture
(R1)
No No
Largest suitable rearward facing
fixture
(R2)
No No
Largest suitable rearward facing
fixture (R2X)
No No
Largest suitable rearward facing
fixture
(R3)
No No
Largest suitable forward facing
fixture
(F2)
No Yes (IUF)
Largest suitable forward facing
fixture (F2X)
No Yes (IUF)
Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
3-37
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
