EasyManua.ls Logo

Mazda MX-5 2024 - Warnings and Cautions for Daily Inspection

Mazda MX-5 2024
534 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warnings and Cautions
for Daily Inspection
WARNING
Do not perform maintenance work if
you lack sucient knowledge and
experience or the proper tools and
equipment to do the work. Have
maintenance work done by a
qualied technician.
Performing maintenance work on a
vehicle is dangerous if not done
properly. You can be seriously injured
while performing some maintenance
procedures.
If you must run the engine while
working under the hood, make
certain that you remove all jewelry
(especially rings, bracelets, watches,
and necklaces) and all neckties,
scarves, and similar loose clothing
before getting near the cooling fan
which may turn on unexpectedly.
Working under the hood with the
engine operating is dangerous. It
becomes even more dangerous when
you wear jewelry, loose clothing or
have long hair or a long beard. Either
can become entangled in moving parts
and result in injury.
Pull over to a safe location, then
switch the vehicle power o and
make sure the fan is not running
before attempting to work near the
cooling fan.
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indenitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not leave items in the motor
compartment.
After you have nished checking or
doing servicing in the engine
compartment, do not forget and leave
items such as tools or rags in the motor
compartment. Tools or other items left
in the engine compartment could
cause the engine damage or a re
leading to an unexpected accident.
CAUTION
When using a chassis roller, turn the
following systems o to prevent them
from mis-operating while the vehicle is
running on the chassis roller.
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)
Cruising & Trac Support (CTS)
Smart Brake Support (SBS)
Inspection and Servicing/Cleaning
Daily Inspection
9-18
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34

Table of Contents

Related product manuals