How to Use the Driver
Attention Alert (DAA)
Operating the DAA
The DAA operates when all of the
following conditions are met and the
system detects driver fatigue or
decreased attentiveness.
The system has completed learning
of the driver’s driving data.
The system detects white (yellow)
lane lines.
60 minutes have passed since the
driver began driving.
The vehicle speed is about 65 km/h
to 140 km/h (41 mph to 86 mph).
When the DAA is operating, the screen
display and warning sound notify the
driver that his/her attention level has
decreased.
Instrument cluster
1. “Time for a Break”
NOTE
The DAA does not operate if any of
the following conditions is met.
The vehicle is making a sharp turn.
The vehicle is changing lanes.
The DAA may not operate normally if
any of the following conditions is
met.
The visibility of white (yellow) lane
lines is poor.
The vehicle is jolted or swayed
continuously by strong winds or
rough roads.
The DAA detects driver fatigue and
decreased attentiveness based on
the driving data when driving the
vehicle at a vehicle speed between
about 65 km/h and about 140
km/h (41 to 86 mph) for about 20
minutes. The learned driving data is
reset when any of the following
conditions is met.
The vehicle is stopped for 15
minutes or longer.
The vehicle is driven at less than
about 65 km/h (41 mph) for
about 30 minutes.
The vehicle power is switched OFF.
After the DAA has displayed the first
message encouraging rest, it does
not display the next one until 60
minutes have passed.
Turning off the DAA
Turn
off
the DAA using Mazda
Connect.
Set in the Mazda Connect “Settings” or
consult an Authorized Mazda Dealer.
Driving
Driver Attention Alert (DAA)
5-116
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
