Dashboard Illumination
(Without auto-light control)
When the lights are turned on with the
vehicle power switched ON, the
brightness of the dashboard
illumination is dimmed.
(With auto-light control)
When the lights are turned on with the
vehicle power switched ON, the
brightness of the dashboard
illumination is dimmed. However,
when the light sensor detects that the
surrounding area is bright such as
when the lights are turned on in the
daytime, the dashboard illumination
does not dim.
NOTE
(With auto-light control)
When the vehicle power is switched
ON in the early evening or at dusk, the
dashboard illumination is dimmed for
several seconds until the light sensor
detects the brightness of the
surrounding area, however, the
dimming may cancel after the
brightness is detected.
How to Use the
Dashboard Illumination
1. Dim
2. Bright
A beep sound will be heard when the
knob has been rotated to the
maximum dim position.
Function for canceling illumination
dimmer
The illumination dimmer can be
cancelled by rotating the instrument
panel illumination knob to the right
until a beep sound is heard while the
instrument cluster is dimmed with the
vehicle power switched ON. If the
instrument cluster's visibility is reduced
due to glare from surrounding
brightness, cancel the illumination
dimmer.
Driving
Instrument Cluster
5-21
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
