How to Use the Mazda Radar Cruise Control (MRCC)
MRCC operation conditions
The MRCC can be set when all of the following conditions are met.
(Manual transmission vehicle)
The brake pedal is not depressed.
The vehicle speed is about 30 km/h (19 mph) to 145 km/h (90 mph).
The clutch pedal is not depressed.
(Automatic transmission vehicle)
The brake pedal is not depressed.
The vehicle speed is about 0 km/h (0 mph) to 145 km/h (90 mph).
Setting the MRCC
1. Press the MRCC switch to turn the system on.
When the system is on, the MRCC standby indication (white) is displayed on
the screen.
2. Accelerate to the desired speed.
3. Set the vehicle speed by pressing the RES switch up (SET+) or down (SET-).
Constant speed driving starts when the vehicle speed is set. In addition, the set
speed is displayed on the screen, and the MRCC standby indication (white)
changes to the MRCC set indication (green) .
Driving
Mazda Radar Cruise Control (MRCC)
5-121
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
