CAUTION
If the KEY warning light (red) is
displayed, or the push button start
indicator light (amber) flashes, this
could indicate a problem with the
engine starting system. This may
prevent the engine from starting or
from switching the vehicle power
position to ACC or ON. Have your
vehicle inspected at an Authorized
Mazda Dealer as soon as possible.
Refer to KEY Warning Light (Red) on
page 8-62.
Before leaving the vehicle, make sure
that the vehicle power is switched
OFF.
How to Use the Push
Button Start
The push button start starts/stops the
engine and switches the vehicle power
position depending on the vehicle
status and the driver's operation.
Starting the Engine
1. Make sure that the parking brake is
applied.
2. (Automatic transmission)
Make sure that the selector lever is
in the P position.
3. (Manual transmission)
Depress the clutch pedal and brake
pedal.
(Automatic transmission)
Depress the brake pedal.
The push button start indicator light
(green) and the KEY indicator light
(green)
in the instrument
cluster turn on.
4.
The engine starts and the KEY
indicator light (green)
in the
instrument cluster turns off.
NOTE
Do not use high engine speeds until
reaching the operating temperature.
Stopping The Engine
1. Stop the vehicle.
Driving
Push Button Start
5-11
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
