When the TCS/DSC/KPC is on and you attempt to free the vehicle from being
stuck, the TCS/DSC/KPC will activate. Depressing the accelerator will not
increase engine power and freeing the vehicle from being stuck might be difficult.
When this happens, turn off the TCS/DSC/KPC.
If the TCS/DSC/KPC is canceled and the following systems are operated, the
TCS/DSC/KPC becomes operational.
Smart Brake Support (SBS)
Mazda Radar Cruise Control (MRCC)
If the DSC OFF switch is pressed and held for 10 seconds or longer, the
TCS/DSC/KPC operation can no longer be turned off even if the DSC OFF switch
or
DSC-TRACK
switch is pressed. In this case, the DSC OFF switch or
DSC-TRACK
switch will operate normally when the vehicle power is switched ON again after
being switched OFF.
Driving
Dynamic Stability Control (DSC)
5-67
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
