The air to the floor is warmer than air
to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Ventilation
1. Start the engine.
2. Set the mode selector dial to the
position.
3. Set the air intake selector to the
outside air position (indicator light
turns
off).
4. Set the temperature control dial to
the desired position.
5. Set the fan control dial to the
desired speed.
Windshield Defrosting and Defogging
1. Start the engine.
2. Set the mode selector dial to the
position.
3. Set the temperature control dial to
the desired position.
4. Set the fan control dial to the
desired speed.
5. If dehumidified heating is desired,
turn on the air conditioner.
WARNING
Do not defog the windshield using the
position with the temperature
control set to the cold position:
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious accident.
Set the temperature control to the hot
or warm position when using the
position.
NOTE
For maximum defrosting, turn on the
air conditioner, set the temperature
control dial to the extreme hot
position, and turn the fan control
dial fully clockwise.
If warm air is desired at the floor, set
the mode selector dial to the
position.
When the fan control dial is ON, and
the mode selector dial is in the
or
position, the air conditioner is
automatically turned on and the
outside air position is automatically
selected to defrost the windshield. In
the
or position, the outside air
position cannot be changed to the
recirculated air position.
Dehumidifying
Operate the air conditioner in cool or
cold weather to help defog the
windshield and side windows.
1. Start the engine.
2. Set the mode selector dial to the
desired position.
3. Set the air intake selector to the
outside air position (indicator light
turns off).
Equipment to Make Cabin More Comfortable
Manual Climate Control System
6-16
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
