4. Unload passengers and luggage,
and remove the emergency flat tire
repair kit.
The location of the emergency flat
tire repair kit may differ depending
on the specification.
5. Shake the tire sealant well.
CAUTION
If the bottle is shaken after the
injection hose is screwed on, tire
sealant could spray out from the
injection hose. Tire sealant
contacting clothing or other objects
may be impossible to remove.
Shake the bottle before screwing on
the injection hose.
NOTE
The tire sealant can be used at
outside temperatures down to －
30 ℃ (－22 ℉).
In extremely cold temperatures
(0 ℃ (32 ℉) or below), the tire
sealant hardens easily and injection
of the sealant will be difficult.
Warm the sealant inside the vehicle
before doing the injection work.
6. Remove the cap from the bottle.
Screw on the injection hose with
the bottle's inner cap left on to
break the inner cap.
7. Remove the valve cap from the flat
tire. Press the back of a valve core
tool to the core of the tire valve and
bleed all the remaining air.
What to Do in Case of Emergency
Tire is Punctured or Bursts
8-27
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
