3. Insert a tape-wrapped flathead
screwdriver into the gap and slide
it.
4. Twist the flathead screwdriver and
remove the upper cover.
5. Remove the cap using the
tape-wrapped flathead screwdriver.
6. Remove the battery using the
tape-wrapped flathead screwdriver.
7. Insert a new battery into the key so
that the positive pole is facing up.
8. Install the cap.
9. Install the upper cover.
10.Attach the lower cover so that its
tabs are inserted into the slots of
the key.
Inspection and Servicing/Cleaning
Key Inspection
9-46
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
