3. Grasp the support rod in the
padded area and secure it in the
support rod hole indicated by the
arrow to hold the hood open.
Closing the Hood
1. Check under the hood area to
make certain all filler caps are in
place and all loose items (e.g.
tools, oil containers, etc.) have
been removed.
2. Lift the hood, grasp the padded
area on the support rod, and secure
the support rod in the clip. Verify
that the support rod is secured in
the clip before closing the hood.
3. Lower the hood slowly to a height
of about 20 cm (7.9 in) above its
closed position and then let it drop.
Opening/closing
Hood
4-22
MX-5_8ME4-EA-23L_Edition1_new 2023-8-31 16:47:34
To Next Page
Loading...
