ELECTRONICS INSTALLATION
Copyright © 2017 McCrometer, Inc. All printed material should not be changed or altered without permission of
McCrometer. Any published technical data and instructions are subject to change without notice. Contact your McCrometer
representative for current technical data and instructions.
www.mccrometer.com
3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA Printed In the U.S.A.
TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078 Lit. # 30120-48 Rev. 2.4 / 11-5-18
20
5.0 MAINTENANCE
The FPI Mag is essentially a maintenance free meter with no user serviceable parts. However, the metered uid
may contain solids or other contaminants which may coat the sensor electrodes. A periodic inspection may be
recommended to ensure the sensor electrodes are clean. To clean the unit, remove the sensor following all of the
instructions and safety warnings contained in Section 3.0. When the sensor is removed from the pipe, carefully
wipe down the sensor with a soft cloth and rubbing alcohol.
4.0 ELECTRONICS INSTALLATION
See the Installation, Operation and Maintenance Manual for the converter supplied with your system.
To Next Page
Loading...
Need help?
General
