McCrometer WATER SPECIALTIES FlowCom FC101 User Manual

30119-50 Rev. 2.2 | 23JUL2020
Page 23
PROGRAMMING
Pulse Unit
PLS-Un
From 20mA
Unit
Menu
Blink off, Save
20mA DP
20mA-dP
Show "20mA-dP" onTotalizer line.
Blink current setting or display
blinking "0" on Rate line.
P
0
0.0
0.00
0.000
0.0000
Display
Default is "0" (no DP).
Cycles the DP from the
current selection, from right
to left.
Move DP to desired location.
DP blinks until selected.
Blink off, Save
20mA FS
20mA-FS
Show "20mA-FS" on Totalizer line.
Blink current setting or display
blinking "0" on Rate line.
P
Change Digit.
Digit blinks until selected.
Move Cursor Left to next
digit position.
9
8
7
6
5
4
3
2
1
0
Display
Default is "00000". UP
arrow cycles through each
digit. LEFT arrow moves to
next digit location, from
right to left.
To Pulse
Decimal
Place
Menu
P
Blink off, Save
P
Select Unit.
Unit blinks until selected.
Display
Miner's inch-hour (9G)
Miner's inch-day (9G)
Miner's inch-hour (11.22G)
Miner's inch day (11.22G)
Miner's inch (9G)
Miner's inch (11.22G)
Ton (Short)
Acre-inch
Imperial gallon
Barrel (55G)
Barrel (46G)
Barrel (42G)
Barrel (31G)
Metric ton (KL)
Megaliter
Description only - not displayed.
Show "PLS-Un" on
Totalizer line.
Blink current symbol or
display blinking "GAL" on
Rate line.
Un 54
Un 53
Un 52
Un 51
Un 50
Un 49
Un 48
Un 47
Un 46
Un 45
Un 44
Un 43
Un 42
Un 41
Un 40
AFT
CUM
LIT
CUF
GAL
P
P
First Menu Level
7 20mA-dP
8 20mA-FS
9 PLS-Un

McCrometer WATER SPECIALTIES FlowCom FC101 Specifications

General

Brand	McCrometer
Model	WATER SPECIALTIES FlowCom FC101
Category	Measuring Instruments
Language	English