McCrometer WATER SPECIALTIES FlowCom FC101 - Page 27

30119-50 Rev. 2.2 | 23JUL2020
Page 25
PROGRAMMING
NOTE:
1. Each electronic register has a unique serial number separate from the meter (parent) serial number.
Register
Serial
Number
Show "SErno" on Rate line.
Right Digit or current setting blinks
on Totalizer line.
SErno
Change Digit.
Digit blinks until selected.
Move Cursor Left to
next digit position.
-
9
8
7
6
5
4
3
2
1
0
Display
UP arrow cycles through
each digit. LEFT arrow
moves to next digit location,
from right to left.
Dashes are allowed at user
selected positions.
To Set Code
Menu
Parent Meter
Serial
Number
Show "Par-S" on Rate line.
Right Digit or current setting blinks
on Totalizer line.
Blink o, Save
Par-S
Change Digit.
Digit blinks until selected.
Move Cursor Left to
next digit position.
-
9
8
7
6
5
4
3
2
1
0
Display
UP arrow cycles through
each digit. LEFT arrow
moves to next digit location,
from right to left.
Dashes are allowed at user
selected positions.
P
P
Note:
1. Each electronic register has a unique serial number separate from the meter (parent) serial number.
Blink o, Save
P
P
Second Menu Level
1 Par-S
2 SErno