McHale 991 High Speed Round Bale Wrapper
53
The cut and hold knife guard must be swung open before starting to wrap; otherwise
the film will not get cut within the cut and hold. Always close the knife guard after work
is complete, as the knife is really sharp! Use protective gloves and beware of sharp
knife edges!
WARNING: Do not clamp film in the ‘cut & hold’ mechanism
Do not attempt to clamp plastic film in the ‘cut & hold’ mechanism as this
action may result in serious injury!
CAUTION: Use protective gloves
Use protective gloves for any manual work in this area! Beware of sharp
knife edges.
Knife guard open Knife guard closed
To Next Page
Loading...
