McHale C430/C460/C470/C490 Bale Chopper
25
Keep hands and feet clear of moving floor slats and
rollers, while the tractor is running. Close all covers
and guards and keep out of the danger zone.
(CST00231)
Keep hands away from knives and sharp edges
(CST00619)
The PTO wide angle joint must never exceed 80
degrees, both when stationary or during operation.
Permanent damage may result otherwise.
(CST00658)
Floor movement indicator
(CST00734)
Tie down points
(CST00901)
Jacking points (triangle)
(CST00923)
Check tyre pressure and wheel nuts
(CST00936)
To Next Page
Loading...
