McHale C460 - Default Chapter; Table of Contents

McHale C430/C460/C470/C490 Bale Chopper
4
Table of Contents
1 Introduction 6
2 Product information 7
2.1 Designated use of the machine 7
2.2 Front view 8
2.3 General dimensions & specifications 9
2.4 Tractor attachment 9
2.5 Machine specifications 10
2.6 Tyre specifications (C460/C470/C490) 10
3 General safety 11
3.1 Be aware of all safety information 11
3.2 Follow all safety instructions 11
3.3 Store all items carefully 12
3.4 Personal protective equipment (PPE) 12
3.5 In case of emergencies 12
3.6 Stay clear of rotating elements 12
3.7 Trained operator criteria 13
3.8 Operating the machine 13
3.9 In the event of a fire 13
3.10 General safety warnings 14
4 Specific safety warnings 19
4.1 Electronic safety warnings 19
4.2 Hydraulic safety warnings 19
4.3 Noise level 20
4.4 Fire precautions 20
4.5 Special safety devices/instructions 20
4.6 Safety instruction decal locations 21
4.7 Safety warnings & instructions explained 22
4.8 Description of the serial number plate 26
4.9 Machine lifting guidelines 26
4.10 Jacking guidelines 27
5 Tractor requirements & preparation 28
5.1 Tractor requirements 28
5.2 Control box installation 28
5.3 Attaching to drawbar (C460/C470/C490) 29
5.4 Preventing unauthorised use 34
5.5 Attaching to 3-point linkage (C430) 35
5.6 Attaching the machine to a 540 rpm PTO 36
5.7 Making connections to the tractor 36
5.8 Connecting the control box 37
5.9 Machine and tractor stability (C430) 37
5.10 Lighting system 38