McHale C430/C460/C470/C490 Bale Chopper
75
11.2 Start of season
Fully review this operators instruction manual.
Check and fill gearbox oil level, if necessary. (See ‘Gearbox oil’)
Grease and lubricate all pivot points.
Tighten all bolts, nuts and setscrews. (See ‘Tightening torque values’)
Check air pressure in tyres and adjust if necessary. (C460/C470/C490)
Connect control box and inspect for correct operation of all functions. (See
‘Control box functions’)
Inspect and modify, if necessary, all machine adjustments. (See ‘Bale
chopper operation & adjustments’)
Remove the grease from the beater and rotor knives. Use extreme caution
when carrying out this operation, ensure to wear protective gloves and
clothing!
To Next Page
Loading...
