McHale C430/C460/C470/C490 Bale Chopper
72
Greasing diagram (C460 shown)
Additional greasing needs to be carried out as shown. This decal is mounted on the
front of the machine. (See ‘Safety instruction decal locations’) (CST00315 - C430 /
CST00223 - C460/C470/C490)
WARNING: Wear proper safety equipment & follow all instructions
Ensure to wear proper safety equipment at all times when working with
the machine, such as gloves, eye protection, etc. and follow all safety
decals and instructions.
ENVIRONMENT: Health and safety rules for the environment
It is vitally important to observe health and safety rules in order to avoid
unnecessary environmental damage or danger to anybody near the
machine. This especially applies to the responsible disposal of oil. Never
spill pollutants (oil, grease, filters, etc.) on the ground, never pour them
down the drain and never discard them where they can pollute. Never
throw away or burn waste net or plastic. Burning plastics is toxic as they
release dioxins and furans. To inhale dioxins or to be exposed to its
fumes can cause deadly results. Respect the environment! Always take
waste materials to a recycling centre.
To Next Page
Loading...
