McHale F5500 Baler
29
Do not stand in the articulation area while the tractor
engine is running.
(CST00141)
Never perform any adjustments or reach into the netter
unless the PTO has been disengaged and the tractor
has been shut down and the key has been removed.
It is also recommended that the tension be released
from the netter knife to avoid it being tripped
accidentally.
(CST00142)
Stay clear of the rotating PTO shaft. Never use the
machine if the PTO guarding is missing or damaged.
Entanglement in rotating drive line can cause serious
injury or death. It is important to ensure that the
rotating guard on the driveline rotates freely. Always
stop the engine and ensure that driveline has stopped
before making connections, adjustments or cleaning
out PTO driven equipment.
(CST00143)
Crush hazard. Keep hands clear of rotating elements.
Do not remove the guard while the engine is running.
(CST00144)
To Next Page
Loading...
