Need help?Do you have a question about the McIntosh MA5200 and is the answer not in the manual?
General| Power Output per Channel | 100 Watts |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.005% |
| Input Impedance | 20k ohms |
| Rated Power Band | 20Hz to 20kHz |
| Dynamic Headroom | 1.8dB |
| Preamplifier Output | Yes |
| Dual Mono Power Supply | No |
| USB Input | 1 |
| Coaxial Input | 1 |
| Optical Input | 1 |
| Damping Factor | >200 |
| Power Requirement | 120V 50/60Hz |
| Digital Inputs | Coaxial, Optical, USB |
| Frequency Response | +0, -0.5dB from 20Hz to 20kHz +0, -3dB from 10Hz to 100kHz |
Covers Right/Left Outputs, USB D/A, IR Input, Data Ports, and RS232-C connections.
Instructions for connecting power control and data control cables between components.
Steps for connecting balanced, unbalanced, phono, digital, and USB audio sources.
How to select input sources, mute audio, and control disc players.
Steps to turn the MA5200 ON/OFF and select audio input sources.
Adjusting listening level and overview of Trim Functions like Balance.
How to adjust input levels for consistent volume across sources.
Instructions for using Trim, Mute, the headphone jack, and understanding power meters.
Guide to connecting and operating the MA5200 via USB with a computer.
Procedure for resetting the unit's microprocessors if controls stop functioning.
How to reset all adjustable settings (Setup and Trim) to factory defaults.
To Next Page
