MCM Electronics iRIS8+ User Manual

Describes methods to reset the system to its original factory default configurations.

Explains sequential and parallel methods for reading programmed settings.

Guides on how to access and navigate the system's programming interface.

Details functions related to panel operation, arming, and basic settings (00-55).

Covers functions for reporting, phone numbers, and communication formats (60-89).

Details advanced features like PGM output, RF modules, and SMS control (80-99).

Explains the Master Code's role in system setup and user code management.

Details the programming and management of User Code 1 and other user codes.

Sets the account number for transmission to the central monitoring station.

Configures the primary phone number for reporting to the monitoring company.

Sets the alternative phone number for reporting if the primary fails.

Configures a third phone number for SMS reporting, particularly with GSM modules.

Determines the format the dialler uses for reporting events.

Enables or disables duress reporting to prevent accidental alarms.

Automatically isolates faulted sections to prevent arming errors.

Programs the low current output to activate based on selected events.

Configures SMS reporting, command reception, and response settings.

The Technician code used to set up all functions of the system.

Details the structure and event codes used in Contact ID reporting.

Defines the format for SMS commands and their corresponding parameters.