Page 21
Options : (Single digit entry required)
Any sector or combination of sectors from 1 to 8
Function 84 - Chime Sections Default - No Chime Sections
Example : While in program mode (Program LED ashing)
Key Sequence Operation
84 - Enter Function No.
7 - Enter 7 (7 = Section 7 is Chime)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue programming by
entering a new function number.
Description :
This function will allow sections to trigger
the keypad beeper for 1 second when in the
disarm state.
Note :
Function 80 option 6 can be used to activate the PGM output when a chime section is triggered.
Chime zones will still sound an alarm when fully or partial armed
Function 85 - Add wireless sensors
Comming soon
Function 86 - Delete wireless sensors
Comming soon
To Next Page
Loading...