MCM Electronics iRIS8+ - Function 43 - Partial Mode; Function 47 - Keypad and Remote Panic Audible; Function 49 - Exit;Entry Sections in on Mode

Page 11
Description :
Partial mode sets up a preprogrammed
list of sections which are automatically
isolated when the unit is turned on using
the partial key.
Description :
This function determines whether the
keypad panic activation (holding the
ON and the OFF keys depressed at
the same time for 3 seconds) or keyfob
panic activation (holding buttons 1 & 2
on the remote keyfob momentarily) will
cause the sirens to sound in addition to
reporting to the monitoring company, only
report or disabling the panic function.
Description :
This function allows the display and or
changing of those sections which will
have the exit/entry delays dened in
Functions 40 and 41.
Options : (Two digit entry required per sector)
Any sector or combination of sectors from 1 to 8
Options : (Single digit entry required)
0 = Panics disabled (keypad & remote)
1 = Silent Panic (report only)
2 = Audible Panic (Sirens) and report.
Options : (Two digit entry required per sector)
Any sector or combination of sectors from 1 to 8
Function 47 - Keypad & Remote Panic Audible Default - Disabled
Example : While in program mode (Program LED ashing)
Key Sequence Operation
47 - Enter Function No.
1 - Enter Option (Panics now silent)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue programming by enter-
ing a new function number
Example : While in program mode (Program LED ashing)
Key Sequence Operation
49 - Enter Function No.
0208 - Enter Option (Sector 2 is removed and section 8 is added)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue programming by enter-
ing a new function number.
Function 49 - Exit/Entry Sections in ON Mode Default - Sectors 1 & 2
Example : While in program mode (Program LED ashing)
Key Sequence Operation
43 - Enter Function No.
050708 - Enter Options (Sectors 5, 7 & 8 will be isolated)
On - Store Entry
Installer may now exit program mode by pressing the OFF button or continue program-
ming by entering a new function number
Function 43 - Partial Mode Default - No sections programmed.