MDC XT13 - Removing the Access Door; Closing the Access Door

63 | Page
www.mdcusa.co m
I
Ph: 833-632-8721
I
Page | 63
Removing the access door
1. Open the access door to Position .
2. Move the access door upwards to remove it.
Closing the access door
1. If removed, insert the access door into the cover plate.
2. Make sure that the webbing is not pinched between the access door and the cover plate.
3. Press the access door against the cover plate.
4. Turn the turn lock clockwise into the horizontal position.
Damage to the access door and the RV if the
access door is not closed properly!
• Make sure that the access door is flush with the
cover plate when closed.