EasyManua.ls Logo

MDC XT13 - Page 97

MDC XT13
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96 | Page
www.mdcusa.co m
I
Ph: 833-632-8721
I
Page | 96
Every 6 MONTHS / 3000 mile SERVICE CHECKED
Hitch
Check hitch bolts to 90Nm/66ft lb.
Lubricate
Handbrake
Check cable and adjust if necessary
Hand winch
Check brake function and webbing
Suspension
Torque bolts to 190Nm/140ft lb
Grease bushes and check for play.
Check retaining chain shackles tight.
Inspect shock absorber for condition.
Inspect shock absorber bushes
Brakes
Inspect and adjust. Check lining thickness and drum wear
Wheel bearings
Remove, clean and re-lubricate. Inspect for wear and replace if
necessary
Wheel Nuts
Inspect condition and torque to (125Nm/92ft lb ½” studs)
(140Nm/103ft lb 14mm studs alloy rims) (200Nm/148ft lb 14mm
studs steel rims)
Tires
Inspect for abnormal wear, damage, and pressure
Lights Check all lights are functioning
Battery
Check terminals and voltage at full charge
Seals
Check condition and correct latch/lock adjustment for correct 30-50%
compression
General fixings
Check all structural fixing are secure.
Seals & Latches
Check all seals on doors and hatches compress 30-50%. All seals in
serviceable condition and free of damage.
Suspension
Grease bushes and check for play.
Check torque on suspension hanger bolts (190nm)
Check retaining chain shackles tight.
Service Centre:
Notes:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________

Table of Contents

Related product manuals