MECOS IMC15 - Mode 4: Current Faults (Fault and Warning Monitor)

67 pages

To Next Page

To Previous Page

IMC15

5.3.5 Mode 4: Current Faults (Fault and Warning

Monitor)

Using the fault and warning monitor, the current faults obtai-

ned from the internal device supervision can be viewed and

reset. The device supervision is activated automatically when

starting up the IMC15 and copies all faults and selfcheck faults

occurred to the fault history (warnings are not written to the

fault history). In the following section, handling of the fault

and warning monitor is described in detail.

4 Faults and Warnings

No Menu Item Description

4 Subpage #1:

Current Faults

Viewing of all current faults and warn-

ings occurred during operation of the

device.