MECOS IMC15 - Mode 2: AMB; Mode 3: Drive

5 Operation
21
5.3.3 Mode 2: AMB
In the AMB mode all important AMB values can be viewed.
5.3.4 Mode 3: Drive
In this mode, rotation speed, desired speed and relevant
inverter currents are displayed.
2 AMB Functions
No Menu Item Description
2 Subpage #1:
AMB Displacements
Displays the AMB displacements in per-
cent of the maximum admissible dis-
placements
2 Subpage #2:
AMB Forces
Displays the AMB forces in percent of
the maximum admissible force (starting
with SW V4.10 in transformed coordi-
nates)
3 Drive Functions
No Menu Item Description
3 Subpage #1:
Drive
Displays output current of inverter as
percentage of maximum current and in
ampere peak (before harmonics filter-
ing, NO measurement of motor current)
Displays current rotation speed
3 Subpage #2:
Drive
Displays desired rotation speed (set-
point for speed controller)