5 Operation
27
5.5 Fault History
5.5.1 Introduction
The fault history holds all faults and selfcheck faults that have
occurred. It consists of a list of 160 entries that are periodi-
cally overwritten (wrap around after 160 faults). It can be
accessed sequentially with the last („youngest“) entry being at
the top. The fault messages are the same as in the fault and
warning monitor.
In order to make navigation among entries of the list (fault
records) easier, every entry has a number followed by the time
and date of the fault. When viewing the cause of the fault
(details of the record) the rotational speed of the system at
the time of the fault is displayed as well.
If the fault history is empty the following default data is dis-
played:
To Next Page
Loading...