Piano
1
2
3
Press the [PIANO] button to enter the PIANO mode,
the chord mode will be disabled automatically, the full
range on the keyboard is piano voice.
Press the [PIANO] button again to exit the current
mode. Press the [VOICE] + [STYLE] , [SONG] ,
[VOICE] and the direct select button, or the [DUAL],
[SPLIT], [M1]~[M6] button, you can exit the piano
mode.
You can select and play the style by pressing the
[STYLE] and the direct select button, LCD will then
display the style name briefly. Accompaniment control
will respond in effect as usual only with the drum tracks.
PIANO
15
Transpose
Transpos
Transpos
You can shift the pitch of the entire keyboard with
the TRANSPOSE function by adjusting the pitch in
semitone steps.
Press the [TRANSPOSE +] or [TRANSPOSE -] button
for the first time to enter the Transpose setting mode,
LCD displays current transpose value briefly.
Press them again and later, the value will increase or
decrease by degrees, also you can use the [+/YES]
and [-/NO] button or the DIAL to adjust it, ranging from
-12 to +12 semitones, the default value is 000.
In TRANSPOSE setting, pressing the [TRANSPOSE +]
and [TRANSPOSE -] button simultaneously will set
the value to default.
1
2
3
If you don't press any button for 5 seconds after
entering the transpose setting mode, it will quit this
menu automatically.
Octave
Octave
Octave
1
2
3
Press the [OCTAVE +] or [OCTAVE -] button for the
first time to enter the Octave setting mode, LCD
displays current octave value briefly.
Press them again and later, the value will increase or
decrease by degrees, also you can use the [+/YES]
and [-/NO] button or the DIAL to adjust it, ranging from
-1 to +1, the default value is 000.
In OCTAVE setting, pressing the [OCTAVE +] and
[OCTAVE -] button simultaneously will set the value
to default.
If you don't press any button for 5 seconds after
entering the Octave setting mode, it will quit this
menu automatically.
DZBPFB0DQXDOB*BSGIDZBPFB0DQXDOB*BSGI
To Next Page
Loading...
Need help?
General
