Medeli MC780 - Memory Management; Storing and Loading Setups

Memory
Bank
Memory feature can be used to preset 48 complete
control-panel setups which could be recalled
whenever needed.
There are 8 banks in total; each bank has 6 memories
(M1~M6).
Press [BANK] button, the LCD displays "00x Mem Bank",
with 00x showing the Bank that has been selected.
Use [+/YES] / [-/NO] button or DIAL to select the bank.
If the current memory data be changed, the
corresponding memory flag on LCD will be erased.
Memory Data
Mem Bank
1
2
The data can be stored to the memory are as follows:
Voice R1, Voice R2, Voice L, Sustain, Style, Tempo,
Function, Mixer, Accomp Volume and Octave.
Store and Load
Press and hold the [STORE] button, then press the
[M1] button (or [M2] ~ [M6]) , the current data will be
stored in them.
Press the [M1] button (or [M2 ~ [M6] ) to load the
data from them and replace the current parameters.
Mem Stor
NewRegga
1
2
Press [STORE] and [M1] together while power the
piano , the memory data will be set as the default value.
Press and Hold
27
DZBPFB0DQXDOB*BSGIDZBPFB0DQXDOB*BSGI 