man_digiflex_com_en_02_5.doc 9
1. GENERAL
1.1 Advice from Megger
The present system manual has been designed as an operating guide and
for reference. It is meant to answer your questions and solve your
problems in as fast and easy a way as possible. Please start with referring
to this manual should any trouble occur.
In doing so, make use of the table of contents and read the relevant
paragraph with great attention. Furthermore, check all terminals and
connections of the instruments involved.
Should any question remain unanswered or should you need the help of an
authorized service station, please contact:
Megger Limited Seba Dynatronic
Mess- und Ortungstechnik GmbH
Archcliffe Road
Kent CT17 9EN
T: +44 1304 502100
F: +44 1304 207342
E: uksales@megger.com
Dr.-Herbert-Iann-Str. 6
D - 96148 Baunach
T: +49 9544 68 – 0
F: +49 9544 22 73
E: sales@sebakmt.com
Hagenuk KMT
Kabelmesstechnik GmbH
Megger USA
Röderaue 41
D - 01471 Radeburg / Dresden
T: +49 35208 84 – 0
F: +49 35208 84 249
E: sales@sebakmt.com
Valley Forge Corporate Centre
2621 Van Buren Avenue
Norristown, PA 19403 USA
T: +1 610 676 8500
F: +1 610 676 8610
Megger
All rights reserved. No part of this handbook may be copied by photographic or other means
unless Megger have before-hand declared their consent in writing. The content of this
handbook is subject to change without notice. Megger cannot be made liable for technical or
printing errors or shortcomings of this handbook. Megger also disclaims all responsibility for
damage resulting directly or indirectly from the delivery, supply, or use of this matter.
To Next Page
Loading...
Need help?
General
