Care and maintenance
88
ENGLISH
ATTENTION
Use of unsuitable milk system cleaning agents may cause damage to the
appliance.
Use Melitta® PERFECT CLEAN Espresso Machines milk system cleaning
agent exclusively.
Requirement: The ready symbol appears on the display.
1. Place a vessel with a capacity of at least 0.7 litres beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk system menu.
4. Use the arrow buttons to select Start and conrm with "menu/ok".
5. Follow the further instructions on the display up to the end of the inten-
sive cleaning programme.
» The ready symbol appears on the display.
Cleaning the milk unit
We additionally recommend regularly cleaning the milk unit, the milk hose
and the milk container (depending on model).
38
39
37
Fig. 23: Removing the milk unit
Proceed as follows to remove the milk unit:
1. Pull the milk hose from the appliance.
2. Push the outlet down as far as it will go.
3. Release the milk unit (37) using two ngers and pull the milk unit down-
wards o the outlet.
4. Pull the milk distributor (38) upwards out of the milk unit.
5. Pull the inlet (39) out upwards.
6. Clean the individual parts with warm water. Use the enclosed cleaning
brush, a soft, damp cloth and normal washing up liquid.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
