ENGLISH
57
6 Preparing coffee / espresso
Prerequisite: The appliance must be ready for operation.
Place one or two cups beside each other under the outlet.•
Press the button for brewing strength •
to adjust the brewing strength.
Turn the coffee quantity regulator (Fig. • A, no. 4) to adjust the cup fill
quantity.
Press the button for dispensing coffee •
once if you want to pre-
pare one cup.
Press the button for dispensing coffee • twice in rapid succession if
you want to prepare two cups.
If you have pressed twice, the bean symbols flash twice in rapid succession →
during dispensing to confirm.
The (double) grinding process and the dispensing of coffee will start. The →
standby symbol
will flash. Dispensing ends automatically when the coffee
fill level set is reached.
To stop dispensing coffee prematurely, press the button for coffee dis-•
pensing
. If you have pressed twice, wait for at least three seconds
after starting dispensing before pressing the button again.
Notes
When the appliance is started up for the first time, the grinder will grind –
longer than usual.
You can also adjust the cup fill quantity during the dispensing process. –
To dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. To
dispense more coffee, turn the regulator to the right.
To Next Page
Loading...
