When water is no longer outlet and the symbol for the milk shower is
illuminated, turn the rotary switch for the milk shower anticlockwise to
close the milk shower.
Subsequently the standby symbol and the bean symbols are illumina-
ted.
The device is ready for operation and water hardness is automatically set to
hardness level 1.
Notes
The Melitta Claris
®
water lter should not remain dry over a longer pe-
riod of time. Consequently we recommend storing the Melitta Claris
®
water lter in a glass of water in the refrigerator if the device will not be
used for a longer period of time.
After inserting the Melitta Claris
®
water lter excess active charcoal will
be washed out of the lter the rst time the appliance is rinsed out. This
can cause a slight grey colour of the rinse water. Subsequently the water
will again be clear.
•
→
–
–
To Next Page
Loading...
