10
WIKA operating instructions hydraulic high pressure controller, model CPC8000-H
PN 0018708001B 11/2020 EN
EN
2. Short Overview
2. Short Overview
The CPC8000-H hydraulic high pressure controller is a multi-range automatic pressure controller designed to test and calibrate
a variety of pressure devices such as pressure gauges, pressure switches, sensors, transducers and transmitters. It can have
up to two internal pressure reference transducers and an optional barometric reference for gauge or absolute emulation. The
CPC8000-H works with a supply pressure of nitrogen or dry, clean air and uses an intensifier assembly to convert this force to
hydraulic pressure. It comes in two different versions, the CPC8000-H-LP, which has a 1:20 pneumatic to hydraulic ratio, and the
CPC8000-H-MP, which has a 1:56 ratio.
Figure 2.1 CPC8000-H with Rolling Rack
2.1 Features
Here is a short list of significant features designed into the CPC8000-H:
■
Optional 19" rack cabinet with casters
■
Operating range from 0… 700 bar (0 … 10,000 psi) for CPC8000-H-LP and 0 .... 1,600 bar (23,000 psi) for CPC8000-H-MP
■
Two removable transducers with up to 0.01%FS measurement accuracy
■
An optional removable / interchangeable internal high accuracy barometric reference transducer providing emulation for both
absolute and gauge pressure ranges
■
9” color LCD with touch screen
■
Ethernet, RS-232, USB and IEEE-488 communications
■
Multiple languages; change the language for on-screen text and number/date formats by simply touching one of the “national
flag” icons available in the setup screen.
■
Multiple media capabilities. (Oil, water, and a variety of others upon request)
To Next Page
Loading...
Need help?
General
