Need help?Do you have a question about the mensor CPC6050 and is the answer not in the manual?
General| Brand | mensor |
|---|---|
| Model | CPC6050 |
| Category | Controller |
| Language | English |
Outlines the user's responsibilities for safe operation and maintenance of the system.
Provides general safety guidelines, warnings, and precautions for operating the instrument.
Lists specific warnings and cautions related to high pressure, explosion proofing, and potential injuries.
Describes the procedure for powering on the CPC6050 and the initial system startup process.
Provides detailed specifications for the CPC6050's measurement capabilities and transducer accuracy.
Describes how to operate the CPC6050 from the front panel and remote computer.
Guides the user through the initial setup process, including language and version information.
Explains how to navigate applications and input parameters using the CPC6050's interface.
Describes the main operating screen (Home App) and its functionalities for monitoring pressure.
Describes the three operating modes (Measure, Control, Vent) of the CPC6050.
Explains how to use digital I/O for assigning conditions and actions to inputs/outputs.
Guides on setting remote operating parameters for instrument command sets, Ethernet, Serial, and IEEE-488.
Allows selection of remote protocol emulation for simulation and testing purposes.
Enables real-time storage of instrument output and remote communication logs to a USB device.
To Next Page
