mensor CPC6050 - Display Settings Application

Operating Instructions - CPC6050 49
Modular Pressure Controller
CPC6050
6.4.4 Display Settings Application
The Display Settings Application allows the user to congure channel specic display properties
like the lter for the reading to reduce uctuations due to electrical noise, and to set the resolu-
tion of the reading. In addition, the bar graph display and calibration function can be specied
here.
Figure 6.4.4 – Display Settings Application
6.4.4.1 Channel Selection
To set the channel’s display parameters, the control channel must be selected. Display parameters are iden-
tical for all channels but can be set dierently in each channel. Figure 6.4.4.1 shows three displays where
channel “A” “B” and Delta have been selected.
Figure 6.4.4.1 - Channel Selection