mensor WIKA CPC8000-H User Manual

78
WIKA operating instructions hydraulic high pressure controller, model CPC8000-H
PN 0018708001B 11/2020 EN
EN
10.2 Approvals and Certificates
10.3
Approvals and certicates
EC declaration of conformity
EMC directive
8)
EN 61326-1 emission (group 1, class A) and interference immunity (industrial application)
Low voltage directive EN 61010-1
RoHS directive 2011/65/EU, article 4
Certicate
Calibration
9)
Standard: A2LA calibration certicate (standard on factory)
Optional: DKD/DAkkS calibration certicate
8) Warning! This is class A equipment for emissions and is intended for use in industrial environments. In other environments, e.g. residential or commercial installations, it can interfere with
other equipment under certain conditions. In such circumstances the operator is expected to take the appropriate measures.
9) Calibration in a horizontal position/operating position.
10.4 Dimensions in mm (in)
10.4.1 CPC8000-H with optional rolling rack
10. Specifications

mensor WIKA CPC8000-H Specifications

General

Brand	mensor
Model	WIKA CPC8000-H
Category	Controller
Language	English